200 Series Steel Posts

200 Series Galvanised Steel Posts — Engineered Specification for Tall & Demanding Walls

The 200 Series is our premium engineered steel post range, designed for the most structurally demanding retaining wall applications in Australia. Specified for tall walls over 1.8m, high surcharge loads, steep sloping blocks, civil and commercial projects, and any site where a structural engineer has specified a 200 UC or 200 PFC section.

When to Use 200 Series Posts

• Walls over 1.8m in height
• High surcharge loads — heavy vehicles, structures built close to the wall, or significant slope above the wall
• Civil, commercial, and infrastructure retaining wall projects
• Sites where a structural engineer has specified 200 UC 46 or 200 PFC sections
• Steep sloping blocks where lateral earth pressure is significantly elevated

200 Series Post Options

• 200 UC 46 H-Beam — universal column section, maximum structural capacity for the most demanding applications
• 200 PFC C-Section End Post — parallel flange channel for engineered end and corner applications

All 200 Series posts are hot-dip galvanised to AS/NZS 4680. For walls under 1.8m, see our 150 Series Posts. Always consult a structural engineer for walls over 1.0m or in complex soil conditions. Read our Post Embedment Guide for correct footing depths.