Retaining Walls Direct delivers concrete sleepers, galvanised steel H-beam and C-channel posts, drainage products and retaining wall accessories to Coffs Harbour, Sawtell, Toormina, Woolgoolga, Korora and the broader Coffs Harbour LGA. We supply homeowners, landscapers, builders and civil contractors on the Mid North Coast of New South Wales.
Coffs Harbour's hilly topography and above-average rainfall (around 1,600mm per year) make retaining walls a common requirement. Sloped blocks, road cuttings and batters are prevalent across the region — and waterlogged soils during and after heavy rain put significant pressure on retaining walls that lack proper drainage. Every wall must include a correctly designed drainage system.
Important: Retaining wall approval requirements in Coffs Harbour vary depending on wall height, slope, proximity to boundaries and adjoining structures. Check with Coffs Harbour City Council or engage a licensed engineer before starting. Retaining Walls Direct is a materials supplier only — we are not the engineer or builder of record for your project.
Browse all concrete sleepers →
Concrete sleepers and steel posts are heavy and require specialist freight. We dispatch via crane truck (Hiab) or flatbed. Delivery cost depends on order size, suburb and site access. Contact us for a freight quote →
Coffs Harbour soils vary significantly with terrain. Coastal flatlands carry sandy, freely draining soils with low bearing capacity. Hilly inland areas feature lateritic clay soils that can be highly reactive — expanding with moisture and contracting in dry periods. On reactive clay, post spacing should not exceed 1.5m and 50MPa sleepers provide better durability. Steep slope sites require engineering assessment regardless of wall height.
In NSW, retaining walls over 1.0m (or within 1.0m of a boundary) generally require development approval under the Environmental Planning and Assessment Act 1979 (EP&A Act) and State Environmental Planning Policy (SEPP). Coffs Harbour City Council may have additional local provisions. Always check requirements for your specific site, wall height and proximity to boundaries before starting. Contact Coffs Harbour City Council for guidance.
Coffs Harbour receives some of the highest rainfall on the NSW coast. Every retaining wall must include: 20mm drainage aggregate for the full retained height; slotted ag-drain pipe at the base directed to a legal outlet; geotextile fabric (min 140gsm) between backfill and drainage aggregate; and weep holes in the wall face at 1.8m centres. Browse drainage products →
Walls over 1.0m or within 1.0m of a boundary typically require development consent from Coffs Harbour City Council under NSW planning law. Always confirm your specific site's requirements with council before commencing.
Timber sleepers are prone to rot in Coffs Harbour's humid, high-rainfall environment. Concrete sleepers offer far superior longevity — typically 50+ years without degradation. Browse concrete sleepers →
Install 20mm drainage aggregate for the full retained height, a slotted ag-drain pipe at the base, geotextile fabric to prevent soil migration, and weep holes in the wall face at 1.8m centres. On steep slopes, consult an engineer for a detailed drainage design.
Get a Free Quote → Call 1800 880 124
✓ AS 4678-2002 Certified Materials | ✓ Hot-Dip Galvanised Steel | ✓ Trade Accounts Available | ✓ ABN 98 351 143 900
All Concrete Sleepers | Steel Posts | Drainage Products | Delivery Info | Get a Quote